Displays There are 38 products.
-
Available16x2 LCD
-
Out of stock16x2 LCD display (red)
-
Out of stock20x4 (2004) Characters LCD
This is a basic 20 character by 4 line display. White text on Blue background. Utilizes the extremely common HD44780 parallel interface chipset.
This is a basic 20 character by 4 line display. White text on Blue background. Utilizes...
This is a basic 20 character by 4 line display. White text on Blue background. Utilizes the extremely common HD44780 parallel interface chipset.
-
Available16x2 character LCD display (I2C)
-
Out of stock20x4 Character LCD display I2C For Arduino
The IIC 2004 LCD display module is a 4 line 20 character LCD module not only set the contrast control knob selector switch also has a backlight and IIC communication interface. For Arduino beginners, not for the cumbersome and complex LCD driver circuit connection and a headache, the real significance of this LCD module will simplify the circuit, this module directly into the Arduino Sensor Shield
The IIC 2004 LCD display module is a 4 line 20 character LCD module not only set the...
The IIC 2004 LCD display module is a 4 line 20 character LCD module not only set the contrast control knob selector switch also has a backlight and IIC communication interface....
-
AvailableI2C LCD controller
LCD1602 screen 4-wire I2C interface controller. LCD1602 adapter board without LCD screen. Helps to save IO ports. Supply voltage: +5 V; Supports the I2C protocol; Backlight and contrast adjustment potentiometer; More easier 4-wire output; Device address: 0x27
LCD1602 screen 4-wire I2C interface controller. LCD1602 adapter board without LCD...
LCD1602 screen 4-wire I2C interface controller. LCD1602 adapter board without LCD screen. Helps to save IO ports. Supply voltage: +5 V; Supports the I2C protocol; Backlight and...
-
Available1.6" Nokia 5110 LCD for Arduino
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller....
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
-
Out of stock2.4 "SPI TFT LCD Module
2.4 "SPI TFT LCD Screen Module, 10pins interface. 240 * 320 (resolution), interface is serial, so it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling. The display Replace LCD5110, Support direct plug in Arduino shield SD card use hardware SPI interface (CS / MOSI / MISO / SCK), No solder pins.
2.4 "SPI TFT LCD Screen Module, 10pins interface. 240 * 320 (resolution), interface is...
2.4 "SPI TFT LCD Screen Module, 10pins interface. 240 * 320 (resolution), interface is serial, so it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling. The display...
-
Out of stockTFT LCD 3.2" touch screen
ITDB02-3.2S module is 3.2" TFT LCD with 65K color 320 x 240 resolutions. The controller of this LCD module is SSD1289, it supports 16bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket.
ITDB02-3.2S module is 3.2" TFT LCD with 65K color 320 x 240 resolutions. The controller...
ITDB02-3.2S module is 3.2" TFT LCD with 65K color 320 x 240 resolutions. The controller of this LCD module is SSD1289, it supports 16bit data interface with 4 wires control...
-
Out of stockNextion NX3224T024 - 2.4" LCD Touch Display
-
Out of stockNextion NX3224T028 (2.8'')
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control...
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or...
-
Out of stockNextion NX4024T032 (3.2')
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control...
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or...
-
Out of stockNextion Enhanced NX4832K035 (3.5')
-
Out of stockNextion NX2432T043 (4.3')
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control...
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or...
-
AvailableNextion IO Adapter
-
Available1602 LCD Shield
This is a very popular LCD Keypad shield for Arduino board. It can be directly plugged on the Arudino board, no soldering or fly-wiring needed, it offer the 16x2 characters display and 6 buttons for Arduino.This Shield uses Arudino LCD library.
This is a very popular LCD Keypad shield for Arduino board. It can be directly plugged...
This is a very popular LCD Keypad shield for Arduino board. It can be directly plugged on the Arudino board, no soldering or fly-wiring needed, it offer the 16x2 characters...
-
AvailableLCD shield with rotary encoder
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a rotary encoder. It is fully compatible with the Arduino UNO board.
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a...
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a rotary encoder. It is fully compatible with the Arduino UNO board.
-
Out of stockTFT1.8SP Shield
TFT1.8 Shield is the 1.8-inch LCD SPI serial expansion board with dual SD card socket, as the SPI serial 1.8-inch LCD operating voltage is 3.3V, 3.3V LDO regulator circuit is added to the shield, therefore, you can directly use 5V power supply. It is fully compatible with Arduino UNO board, so you can achieve the required functionality only by assembling the TFT1.8 Shield with the Arduino board. .
TFT1.8 Shield is the 1.8-inch LCD SPI serial expansion board with dual SD card socket,...
TFT1.8 Shield is the 1.8-inch LCD SPI serial expansion board with dual SD card socket, as the SPI serial 1.8-inch LCD operating voltage is 3.3V, 3.3V LDO regulator circuit is...
-
Out of stockTFT2.2SP Shield
TFT2.2_Serial_Shield is the 2.2-inch LCD SPI serial expansion board with SD card socket, as the SPI serial 2.2-inch LCD operating voltage is 3.3V, 3.3V LDO regulator circuit is added to the shield, therefore, you can directly use the 5V power supply. It is fully compatible with Arduino UNO board, so you can achieve the required functionality only by assembling the Shield with the Arduino board.
TFT2.2_Serial_Shield is the 2.2-inch LCD SPI serial expansion board with SD card...
TFT2.2_Serial_Shield is the 2.2-inch LCD SPI serial expansion board with SD card socket, as the SPI serial 2.2-inch LCD operating voltage is 3.3V, 3.3V LDO regulator circuit is...
-
Available2.8" TFT LCD Touch Shield
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ILI9325DS with 8bit data and 4bit control interface.
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT...
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino shield...
-
Out of stock3.2 TFT LCD Touch Shield
Arduino 3.2'' TFT Touch Shield is an Arduino Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 16bit data and 4bit control interface.
Arduino 3.2'' TFT Touch Shield is an Arduino Mega compatible multicolored TFT display...
Arduino 3.2'' TFT Touch Shield is an Arduino Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino MEGA shield...
-
AvailableBLE Development Shield
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with Arduino Uno). Together with BLEduino, this BLE Shield forms an ideal prototyping platform for both software and hardware developers to go wireless. You will be able to develop your own smart bracelet, smart pedometer, etc. It's a low-power, real-time low energy communication perfect for embedded designs.
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with...
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with Arduino Uno). Together with BLEduino, this BLE Shield forms an ideal prototyping platform...
-
Out of stockPen for resistance screen
-
Out of stockRaspberry Pi 7'' liečiamas ekranas
-
AvailableRaspberry Pi OLED screen shield
OLED add-on V2.0 with built-in 0.96" 128*64 OLED and SSD1306 control chip is customized for Raspberry Pi. Every single pixel in OLED can be lighted up or off by this SSD1306 control chip. In a lot of projects, we only need to display little information such as the state of system or IP.
OLED add-on V2.0 with built-in 0.96" 128*64 OLED and SSD1306 control chip is customized...
OLED add-on V2.0 with built-in 0.96" 128*64 OLED and SSD1306 control chip is customized for Raspberry Pi. Every single pixel in OLED can be lighted up or off by this SSD1306...
-
AvailableRaspberry PI 2.8 TFT LCD
Raspberry PI 2.8 TFT is customized for Raspberry Pi 2 and Raspberry PI 3. It is based on 2.8 TFT LCD display module. The screen is driven based on an 8-bit data bus and a 4-bit ILI9323DS to control bus interface, which can display 263K colors. With touch function, it can be used to display the desktop of Raspberry Pi and realize clicking, touch and feedback.
Raspberry PI 2.8 TFT is customized for Raspberry Pi 2 and Raspberry PI 3. It is based...
Raspberry PI 2.8 TFT is customized for Raspberry Pi 2 and Raspberry PI 3. It is based on 2.8 TFT LCD display module. The screen is driven based on an 8-bit data bus and a 4-bit...
-
Out of stockSegment LED Brick (Octopus)
OCTOPUS 056C Segmentric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The module using 0.56 inches common cathode digital tube with clock point and and decimal point can be used for simple clock display and digital display.
OCTOPUS 056C Segmentric is a type of common cathode digital tube display module based...
OCTOPUS 056C Segmentric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The module using 0.56...
-
AvailableSegment LED Brick (Octopus)
OCTOPUS 036A Segmentric is an easy-designed type of digital tube electronic building block with 0.36 inches common anode display, used for simple numbers or numbers with decimal point display.
OCTOPUS 036A Segmentric is an easy-designed type of digital tube electronic building...
OCTOPUS 036A Segmentric is an easy-designed type of digital tube electronic building block with 0.36 inches common anode display, used for simple numbers or numbers with decimal...
-
Out of stockAlphanumeric LED Brick (Octopus)
OCTOPUS Alphanumeric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The module using 0.56 inches common cathode digital tube and can be used for simple letter display and digital display.
OCTOPUS Alphanumeric is a type of common cathode digital tube display module based on...
OCTOPUS Alphanumeric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The module using 0.56 inches...
-
Out of stockLED time display module
The driver chip of the 4-Digit Display is tm1637 and it can be used to display the integer, clock, stopwatch, score and so on.
The driver chip of the 4-Digit Display is tm1637 and it can be used to display the...
The driver chip of the 4-Digit Display is tm1637 and it can be used to display the integer, clock, stopwatch, score and so on.
-
Out of stock8 RGB LED stick (board)
This is the RGB LED stick, a small chainable board with eight 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V.
This is the RGB LED stick, a small chainable board with eight 5050 WS2812 RGB LEDs. The...
This is the RGB LED stick, a small chainable board with eight 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel...
-
Out of stock12 WS2812 RGB LED cycle
Black circular shape, 12 ultra-bright intelligent LED Neopixels arranged in a 50mm diameter circular PCB above. These ring RGB lights are simply connected by a cascade output pin to another input pin (DI-> DO). By cascade this way, only a microcontroller pins you can control as many LED lights! Each LED driver integrates a chip in it, let us become intelligent and addressable LED.
Black circular shape, 12 ultra-bright intelligent LED Neopixels arranged in a 50mm...
Black circular shape, 12 ultra-bright intelligent LED Neopixels arranged in a 50mm diameter circular PCB above. These ring RGB lights are simply connected by a cascade output...
-
AvailableRGB LED modulis
-
Available16 RGB šviesos diodų matrica
-
Available24 WS2812 RGB LED cycle
Black circular shape, 24 ultra-bright intelligent LED Neopixels arranged in a 50mm diameter circular PCB above. These ring RGB lights are simply connected by a cascade output pin to another input pin (DI-> DO). By cascade this way, only a microcontroller pins you can control as many LED lights! Each LED driver integrates a chip in it, let us become intelligent and addressable LED.
Black circular shape, 24 ultra-bright intelligent LED Neopixels arranged in a 50mm...
Black circular shape, 24 ultra-bright intelligent LED Neopixels arranged in a 50mm diameter circular PCB above. These ring RGB lights are simply connected by a cascade output...
-
AvailableBattery Style LED Digital Tube (Red)
-
Available1.54 inch E-ink display module
-
