Sensors, Indicators, Transmitters There are 214 products.
Subcategories
-
Electronic Bricks -
Modules (Octopus) -
Lilypad moduliai -
Wireless communication, RFID -
RFID -
Displays -
Control equipment -
Temperature, humidity, gas... -
Ranging, motion sensors -
Accelerometers, Gyroscopes,... -
Relays, Solenoids -
Power supply -
Other sensors and modules -
Gas sensors -
Indikacijos, optiniai moduliai -
Svorio matavimas
-
AvailableRFID Bracelet Tag S50 (13.56MHz)
This is a MiFare Classic bracelet tag - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
This is a MiFare Classic bracelet tag - often used for electronic locks or customer...
This is a MiFare Classic bracelet tag - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is...
-
AvailableMFRC522 RFID Module
t is an contactless reader module based on the MFRC522 from NXP B.V.. Communication Via Serial makes it simple and easy-using. Compatible with ISO/IEC 14443 A/MIFARE cards, it supports all variants of the MIFARE Mini, MIFARE 1K, MIFARE 4K, MIFARE Ultralight, MIFARE DESFire EV1 and MIFARE Plus RF identification protocols, and the operating distance in Read/Write mode is up to 40 mm.
t is an contactless reader module based on the MFRC522 from NXP B.V.. Communication Via...
t is an contactless reader module based on the MFRC522 from NXP B.V.. Communication Via Serial makes it simple and easy-using. Compatible with ISO/IEC 14443 A/MIFARE cards, it...
-
AvailableRFID transperant key Tag S50 (13.56MHz)
This is a MiFare Classic keychain fob - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
This is a MiFare Classic keychain fob - often used for electronic locks or customer...
This is a MiFare Classic keychain fob - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is...
-
Out of stockRFID Sticker Tag S50 (13.56MHz)
This is a RFID Sticker - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
This is a RFID Sticker - often used for electronic locks or customer identification but...
This is a RFID Sticker - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired. The tag...
-
Available2.4GHz transmitter nRF24L01p+ PA+ LNA+ V3.1
The newest module nRF24L01P version 2.0(upate to V3.1 now) is nRF24L01+PA+LNA upgrad it has same size and more stable performance.The transmission distance to reach 1000 meter with 2DB Antenna at 250kbps data rate on open area.
The newest module nRF24L01P version 2.0(upate to V3.1 now) is nRF24L01+PA+LNA upgrad it...
The newest module nRF24L01P version 2.0(upate to V3.1 now) is nRF24L01+PA+LNA upgrad it has same size and more stable performance.The transmission distance to reach 1000 meter...
-
AvailableMoisture Sensor (EB)
Electronic brick of soil moisture sensor is mainly used to detect the moisture content in the soil. The control board can get the moisture value or threshold in the soil via analog or digital pins.
Electronic brick of soil moisture sensor is mainly used to detect the moisture content...
Electronic brick of soil moisture sensor is mainly used to detect the moisture content in the soil. The control board can get the moisture value or threshold in the soil via...
-
Out of stock20x4 (2004) Characters LCD
This is a basic 20 character by 4 line display. White text on Blue background. Utilizes the extremely common HD44780 parallel interface chipset.
This is a basic 20 character by 4 line display. White text on Blue background. Utilizes...
This is a basic 20 character by 4 line display. White text on Blue background. Utilizes the extremely common HD44780 parallel interface chipset.
-
AvailableJoystick module
This is a breakout module for analog joystick. Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin.
This is a breakout module for analog joystick. Lots of robot projects need joystick....
This is a breakout module for analog joystick. Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the...
-
AvailableWireless power supply module
The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insulation coil, it could serve as a replacement for the Wireless Power Supply with stable 5V output voltage and maximum 600mA output current. Its small size and insulation coil is more suitable for using in wireless project.
The Wireless Charging Module can be applied in electronic equipments in common use for...
The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insulation coil,...
-
AvailablePeltier module TEC1-12706
Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity.
Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side....
Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either...
-
AvailableXPAD Module
Touch module has 9 capacitive touch panels, with the head, and the remaining 3 electrode connections. In addition, the back of the board we added two new analog buttons, with this module, you can have a total of 12 touch sensitive keys and two analog buttons.
Touch module has 9 capacitive touch panels, with the head, and the remaining 3...
Touch module has 9 capacitive touch panels, with the head, and the remaining 3 electrode connections. In addition, the back of the board we added two new analog buttons, with...
-
Out of stockMonocrystalline Solar Panel
86 * 38mm 5.5v 65ma Monocrystalline Solar Panels. Especially suitable for emergency occasions when you will make your phone (notebook) in field work or travel, or experience a power outage, green solar charger anywhere in working condition, to be able to let you uninterrupted with your friends and family to keep contact.
86 * 38mm 5.5v 65ma Monocrystalline Solar Panels. Especially suitable for emergency...
86 * 38mm 5.5v 65ma Monocrystalline Solar Panels. Especially suitable for emergency occasions when you will make your phone (notebook) in field work or travel, or experience a...
-
Available4-way Infrared Tracking Sensor
4-way Infrared Tracking Sensor can be used in smart car or a robot hunt (including the black and white lines), walking along the black line path, also known as tracing, smart car to avoid the cliff, anti-drop, smart car for obstacle avoidance. Detection distance: 1mm to 60 CM adjustable, the closer the more stable performance, white reflective distances.
4-way Infrared Tracking Sensor can be used in smart car or a robot hunt (including the...
4-way Infrared Tracking Sensor can be used in smart car or a robot hunt (including the black and white lines), walking along the black line path, also known as tracing, smart...
-
AvailableThermocouple Type-K - 5cm Probe
Thermocouple good up to 0~1000 °C, for Arduino and other microcontrollers best to use with MAX6675 modules.
Thermocouple good up to 0~1000 °C, for Arduino and other microcontrollers best to use...
Thermocouple good up to 0~1000 °C, for Arduino and other microcontrollers best to use with MAX6675 modules.
-
Out of stockThermocouple Type-K - M6 Screw
Thermocouple Type-K - M6 Screw good up to 0~1000 °C, for Arduino and other microcontrollers best to use with MAX6675 modules.
Thermocouple Type-K - M6 Screw good up to 0~1000 °C, for Arduino and other...
Thermocouple Type-K - M6 Screw good up to 0~1000 °C, for Arduino and other microcontrollers best to use with MAX6675 modules.
-
AvailableMAX6675 thermocouple module (Octopus)
MAX6675 is a 12-bit resolution Serial K-type thermocouple converter, produced by American company MAXIM, with merits of cold junction compensation, linearity correction, thermocouple break detection and so on. This module is able to measure temperature, using the three-wire SPI communication, plus a K-type thermocouple probe connected to Arduino mainboard.
MAX6675 is a 12-bit resolution Serial K-type thermocouple converter, produced by...
MAX6675 is a 12-bit resolution Serial K-type thermocouple converter, produced by American company MAXIM, with merits of cold junction compensation, linearity correction,...
-
AvailableRain/Steam Sensor (Octopus)
This rain/steam sensor can be connected to the Arduino directly. The output voltage will increase when the humidity of the sensor surface goes up. You even could use it as a touch panel.
This rain/steam sensor can be connected to the Arduino directly. The output voltage...
This rain/steam sensor can be connected to the Arduino directly. The output voltage will increase when the humidity of the sensor surface goes up. You even could use it as a...
-
AvailableSpeed module with indicator
This is a speed module for smart car, which adopted the Groove radio photoelectricity, as long as it can go through the nontransparent objects, the Groove (with the disk from the shop in use together)will be triggered to output 5V TTL.Pulses with Schmitt trigger debounce,very stable,can be used to measure the speed,to survey the distance,and perform other functions.
This is a speed module for smart car, which adopted the Groove radio photoelectricity,...
This is a speed module for smart car, which adopted the Groove radio photoelectricity, as long as it can go through the nontransparent objects, the Groove (with the disk from...
-
AvailableVibration Sensor (Octopus)
Vibration Sensor Brick is a module based on vibration trigger switch. When subjected to external vibration touch to achieve the appropriate vibration force, or move away from the speed of the appropriate (partial) effort, conductive pin will produce an instant turn-on (ON) state. While if the external force disappear, electrical characteristics will restore OFF state.
Vibration Sensor Brick is a module based on vibration trigger switch. When subjected to...
Vibration Sensor Brick is a module based on vibration trigger switch. When subjected to external vibration touch to achieve the appropriate vibration force, or move away from...
-
AvailableVibration Sensor 801s (Octopus)
Octopus Passive buzzer Brick is based on a Vibration sensor, High Sensitivity Vibration Detection Sensor - Golden.
Octopus Passive buzzer Brick is based on a Vibration sensor, High Sensitivity Vibration...
Octopus Passive buzzer Brick is based on a Vibration sensor, High Sensitivity Vibration Detection Sensor - Golden.
-
AvailableIR receiver sensor (Octopus)
This is a simple infrared receiver sensor,and mainly receive infrared signal through HS0038 infrared diode. HS0038 is particularly sensitive to the infrared signal,and it can receive the infrared signal very swiftly. It can be used in infrared remote control, infrared transmitter works.
This is a simple infrared receiver sensor,and mainly receive infrared signal through...
This is a simple infrared receiver sensor,and mainly receive infrared signal through HS0038 infrared diode. HS0038 is particularly sensitive to the infrared signal,and it can...
-
AvailableInfrared Remote Control
Compact infrared remote control 38K Universal Slim infrared remote control. Size: 86mm x 40mm x 6mm
Compact infrared remote control 38K Universal Slim infrared remote control. Size: 86mm...
Compact infrared remote control 38K Universal Slim infrared remote control. Size: 86mm x 40mm x 6mm
-
AvailableRotary Encoder (Octopus)
A rotary or "shaft" encoder is an angular measuring device. It is used to precisely measure rotation of motors or to create wheel controllers (knobs) that can turn infinitely (with no end stop like a potentiometer has).
A rotary or "shaft" encoder is an angular measuring device. It is used to precisely...
A rotary or "shaft" encoder is an angular measuring device. It is used to precisely measure rotation of motors or to create wheel controllers (knobs) that can turn infinitely...
-
Available16x2 LCD
-
Out of stock16x2 LCD display (red)
-
Out of stock2.4GHz 2dBI antenna (SMA female plug)
L shape WiFi antenna. Frequency Range: 2400~2500MHZ, gain: 2dBi, VSWR<=1.8
L shape WiFi antenna. Frequency Range: 2400~2500MHZ, gain: 2dBi, VSWR<=1.8
L shape WiFi antenna. Frequency Range: 2400~2500MHZ, gain: 2dBi, VSWR<=1.8
-
Out of stockPN532 NFC (RFID) Module (13.56Mhz)
PN532 NFC module, as its name implies, is based on PN532 chip and used for 13.56MHz near field communication. The module is equipped with onboard antenna, thus no external antenna coil is needed. It is compatible with SPI, IIC and UART interface for communication. With NFC library support for Arduino and Raspberry Pi, it is quite convenient for development of products with NFC functions.
PN532 NFC module, as its name implies, is based on PN532 chip and used for 13.56MHz...
PN532 NFC module, as its name implies, is based on PN532 chip and used for 13.56MHz near field communication. The module is equipped with onboard antenna, thus no external...
-
Available9DOF IMU Sensor Module for Arduino
Nine-axis module (three-axis gyroscope + triaxial accelerometer + three-axis magnetic field); Chip: ITG3205 + ADXL345 + HMC5883L; Power supply :3-5V; Communication : IIC communication protocol (fully compatible with the 3-5v System, circuit contain LLC)
Nine-axis module (three-axis gyroscope + triaxial accelerometer + three-axis magnetic...
Nine-axis module (three-axis gyroscope + triaxial accelerometer + three-axis magnetic field); Chip: ITG3205 + ADXL345 + HMC5883L; Power supply :3-5V; Communication : IIC...
-
Available5VDC, 10A Relay
-
AvailableIIC GPIO Module
I2C GPIO Module can achieve communication through Arduino two I2C data lines (SDA / SCL) with I2C GPIO module, thus convert the readable and writable 16 channel digital I / O port. In addition, 8 modules can be simultaneously in parallel, and each module can be set to different IIC address, through which you could parallel multiple modules for data acquisition and control.
I2C GPIO Module can achieve communication through Arduino two I2C data lines (SDA /...
I2C GPIO Module can achieve communication through Arduino two I2C data lines (SDA / SCL) with I2C GPIO module, thus convert the readable and writable 16 channel digital I / O...
-
AvailableElectromagnet 12VDC, 3W, 25N, 2.5kg
-
Available4 kanalų 5V rėlių modulis
-
Available8 kanalų 5V rėlių modulis
-
Available433Mhz RF link kit
The 433MHz RF link kit is consisted of transmitter and receiver, popularly used for remote control.
The 433MHz RF link kit is consisted of transmitter and receiver, popularly used for...
The 433MHz RF link kit is consisted of transmitter and receiver, popularly used for remote control.
-
Out of stockAC-DC Power Module 5V 700mA
This power module is an isolated-type industrial level power module that can be used in AC-DC power converting. When the situations of over voltage, over current and short circuit appear, this module will help to protect whole device by locking up. What’s more, It can realize isolating the high and low voltage and support AC 85~265V input and DC 5V output.
This power module is an isolated-type industrial level power module that can be used in...
This power module is an isolated-type industrial level power module that can be used in AC-DC power converting. When the situations of over voltage, over current and short...
-
AvailableESP8266 WIFI Module
ESP8266 offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ESP8266 offers a complete and self-contained Wi-Fi networking solution, allowing it to...
ESP8266 offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another...
-
Available10DOF IMU module (High quality Barometer, Gyroscope, Accelerometer,...
Using sensors MPU6050, HMC5883L and BMP180, this 10 degrees of freedom IMU will add a whole new world of sensing to your new project.
Using sensors MPU6050, HMC5883L and BMP180, this 10 degrees of freedom IMU will add a...
Using sensors MPU6050, HMC5883L and BMP180, this 10 degrees of freedom IMU will add a whole new world of sensing to your new project.
-
Available6xR6-AA Batteries Holder
-
AvailableLight intensity sensor module BH1750FVI
Digital light intensity detecting. The ROHM genuine BH1750FVI chip. Power supply :3-5v. Data range :0-65535. The sensor built 16bitAD converter. Direct digital output, complex calculation is omitted, omitting calibration. Does not distinguish between ambient light. Close to the visual sensitivity of the spectral characteristics. 1 lux high-precision measurement of a wide range of brightness.
Digital light intensity detecting. The ROHM genuine BH1750FVI chip. Power supply :3-5v....
Digital light intensity detecting. The ROHM genuine BH1750FVI chip. Power supply :3-5v. Data range :0-65535. The sensor built 16bitAD converter. Direct digital output, complex...
-
AvailableEthernet modulis ENC28J60
-
Available4 kanalų MOSFET modulis
-
AvailableScrew Terminal Brick
This electronic brick has two ends. One end is a grove interface for connecting to the boards; the other end is a screw terminal for connecting to the modules that have no interface.
This electronic brick has two ends. One end is a grove interface for connecting to the...
This electronic brick has two ends. One end is a grove interface for connecting to the boards; the other end is a screw terminal for connecting to the modules that have no...
-
AvailableDC-DC Buck Converter Step-Down Module
LM2596 DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Arduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater than 10W) , please add a heat sink on it.
LM2596 DC-DC buck converter step-down power module with high-precision potentiometer,...
LM2596 DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Arduino UNO,...
-
AvailableGSM/GPRS/GPS Module
SIM908 Module is a high-performance quad-band GSM / GPRS / GPS module of industrial grade, which can be controlled via AT command set. It can be used to make or receive calls, to send and to receive SMS messages. Moreover, it can be used to send and to receive data after connected to the network. Besides, it can realize global positioning by locating its geographical position with GPS.
SIM908 Module is a high-performance quad-band GSM / GPRS / GPS module of industrial...
SIM908 Module is a high-performance quad-band GSM / GPRS / GPS module of industrial grade, which can be controlled via AT command set. It can be used to make or receive calls,...
-
AvailableServo variklių/PWM modulis (16 servo)
-
AvailableMOSFET module
-
AvailableTemperature sensor LM35DZ
-
AvailableElektroninių svarstyklių modulis HX711
-
Out of stockSvorio jutikliai (iki 40 kg)
-
Out of stockSvorio jutiklis (iki 1 kg)