Arduino shealds There are 46 products.
-
AvailableProto Screw Shield
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a reset button, LED for D13 pin indicating.
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It...
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large...
-
AvailableArduino Sensor Shield
Arduino sensor shield is specifically designed for Arduino board to connect to various types of electronic brick modules. It is compatible with the mainstream two interfaces of electronic bricks in the market: 2.0mm 4-pin grove interface and 2.54mm 3-pin interface. In addition, the shield is equipped with XBee interface for users to connect it with various external wireless modules.
Arduino sensor shield is specifically designed for Arduino board to connect to various...
Arduino sensor shield is specifically designed for Arduino board to connect to various types of electronic brick modules. It is compatible with the mainstream two interfaces of...
-
AvailableArduino sensor shield (V5.0)
The sensor shield v5.0 allows you to hoop up the sensors directly to Arduino Uno without the use of the breadboard. It allows plug and play connection to various modules like sensors, servos, relays, potentiometers and more. Everything is plug and play. So all you need to do is to read the data from the sensors and output PWM to drive the servos by program in arduino.
The sensor shield v5.0 allows you to hoop up the sensors directly to Arduino Uno...
The sensor shield v5.0 allows you to hoop up the sensors directly to Arduino Uno without the use of the breadboard. It allows plug and play connection to various modules like...
-
AvailableArduino Mega sensor shield (v2.0)
Arduino Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play. Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already.
Arduino Sensor Shield allows you to connect to various modules like sensors, servos,...
Arduino Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play. Each functional module has buckled...
-
AvailableArduino Nano IO shield
Nano IO shield is a breakout board for Arduino Nano. It breaks out all pins as Electronic brick 3pin interface, the Zigbee XBee Series Modules and nRF24L01 wireless interface. And it supports 7-12V external power supply.
Nano IO shield is a breakout board for Arduino Nano. It breaks out all pins as...
Nano IO shield is a breakout board for Arduino Nano. It breaks out all pins as Electronic brick 3pin interface, the Zigbee XBee Series Modules and nRF24L01 wireless interface....
-
Out of stockPrototype Shield with Mini Breadboard for Arduino
Build a prototype circuit, can be directly welded components on board, also be able to connect the mini bread plate above circuit. ProtoShield prototype extension plate with two LED and button circuit, can be used directly, and all the pins and power have been draw out, very suitable for building prototype circuit with Arduino. A product for Arduino that works with official Arduino boards.
Build a prototype circuit, can be directly welded components on board, also be able to...
Build a prototype circuit, can be directly welded components on board, also be able to connect the mini bread plate above circuit. ProtoShield prototype extension plate with two...
-
AvailablePrototype Shield with Mini Breadboard for Arduino Mega
This is a design for an open-source prototyping Mega shield for Arduino Mega2560. It has tons of cool features, to make prototyping on your Arduino easy. This shield include a mini breadboard, two LED and button circuit. Very suitable for building prototype circuit with Arduino. A product for Arduino that works with official Arduino boards.
This is a design for an open-source prototyping Mega shield for Arduino Mega2560. It...
This is a design for an open-source prototyping Mega shield for Arduino Mega2560. It has tons of cool features, to make prototyping on your Arduino easy. This shield include a...
-
AvailableArduino ProtoShield KIT
The ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is brought to the top level.
The ProtoShield mates with the Arduino USB board and gives the user a small soldering...
The ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most...
-
AvailableXBee Shield
XBee Shield is an enhanced Zigbee XBee Series modules breakout board for Arduino, it can directly plug in with Arduino, and use any pin of the basic board to connect with the XBee module serial port.
XBee Shield is an enhanced Zigbee XBee Series modules breakout board for Arduino, it...
XBee Shield is an enhanced Zigbee XBee Series modules breakout board for Arduino, it can directly plug in with Arduino, and use any pin of the basic board to connect with the...
-
AvailableMultifunctional shield
-
Available1602 LCD Shield
This is a very popular LCD Keypad shield for Arduino board. It can be directly plugged on the Arudino board, no soldering or fly-wiring needed, it offer the 16x2 characters display and 6 buttons for Arduino.This Shield uses Arudino LCD library.
This is a very popular LCD Keypad shield for Arduino board. It can be directly plugged...
This is a very popular LCD Keypad shield for Arduino board. It can be directly plugged on the Arudino board, no soldering or fly-wiring needed, it offer the 16x2 characters...
-
AvailableLCD shield with rotary encoder
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a rotary encoder. It is fully compatible with the Arduino UNO board.
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a...
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a rotary encoder. It is fully compatible with the Arduino UNO board.
-
Out of stockTFT1.8SP Shield
TFT1.8 Shield is the 1.8-inch LCD SPI serial expansion board with dual SD card socket, as the SPI serial 1.8-inch LCD operating voltage is 3.3V, 3.3V LDO regulator circuit is added to the shield, therefore, you can directly use 5V power supply. It is fully compatible with Arduino UNO board, so you can achieve the required functionality only by assembling the TFT1.8 Shield with the Arduino board. .
TFT1.8 Shield is the 1.8-inch LCD SPI serial expansion board with dual SD card socket,...
TFT1.8 Shield is the 1.8-inch LCD SPI serial expansion board with dual SD card socket, as the SPI serial 1.8-inch LCD operating voltage is 3.3V, 3.3V LDO regulator circuit is...
-
Out of stockTFT2.2SP Shield
TFT2.2_Serial_Shield is the 2.2-inch LCD SPI serial expansion board with SD card socket, as the SPI serial 2.2-inch LCD operating voltage is 3.3V, 3.3V LDO regulator circuit is added to the shield, therefore, you can directly use the 5V power supply. It is fully compatible with Arduino UNO board, so you can achieve the required functionality only by assembling the Shield with the Arduino board.
TFT2.2_Serial_Shield is the 2.2-inch LCD SPI serial expansion board with SD card...
TFT2.2_Serial_Shield is the 2.2-inch LCD SPI serial expansion board with SD card socket, as the SPI serial 2.2-inch LCD operating voltage is 3.3V, 3.3V LDO regulator circuit is...
-
Available2.8" TFT LCD Touch Shield
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ILI9325DS with 8bit data and 4bit control interface.
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT...
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino shield...
-
Out of stock3.2 TFT LCD Touch Shield
Arduino 3.2'' TFT Touch Shield is an Arduino Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 16bit data and 4bit control interface.
Arduino 3.2'' TFT Touch Shield is an Arduino Mega compatible multicolored TFT display...
Arduino 3.2'' TFT Touch Shield is an Arduino Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino MEGA shield...
-
AvailableBLE Development Shield
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with Arduino Uno). Together with BLEduino, this BLE Shield forms an ideal prototyping platform for both software and hardware developers to go wireless. You will be able to develop your own smart bracelet, smart pedometer, etc. It's a low-power, real-time low energy communication perfect for embedded designs.
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with...
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with Arduino Uno). Together with BLEduino, this BLE Shield forms an ideal prototyping platform...
-
Out of stockTFT LCD ITDB02 Arduino Shield
The ITDB02 LCD module is work in 3.3V voltage level and it's not compatible with Arduino pins , so we make a shield for Arduino to connect with these LCDs. Now user can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
The ITDB02 LCD module is work in 3.3V voltage level and it's not compatible with...
The ITDB02 LCD module is work in 3.3V voltage level and it's not compatible with Arduino pins , so we make a shield for Arduino to connect with these LCDs. Now user can directly...
-
Out of stockTFT LCD ITDB02 Arduino MEGA Shield
The ITDB02 Series LCD module works in 3.3V voltage level and it's not compatible with Arduino MEGA pins , so we make a shield for Arduino MEGA. Now user can directly plug the ITDB02 in the shield and stand on the Arduino MEGA board.
The ITDB02 Series LCD module works in 3.3V voltage level and it's not compatible with...
The ITDB02 Series LCD module works in 3.3V voltage level and it's not compatible with Arduino MEGA pins , so we make a shield for Arduino MEGA. Now user can directly plug the...
-
AvailableMotor/Stepper/Servo Shield
Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. This sheield can drive up to 4 bi-directional DC motors with individual speed selection or up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. It also have 2 connections for 5V servos.
Arduino is a great starting point for electronics, and with a motor shield it can also...
Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. This sheield can drive up to 4...
-
AvailableMotoMama
MotoMama is a motor drivers shield for Arduino, based on L298N H-bridge driver chip. You can use this shield to drive two DC motors or an four-wire two-phase stepper motors with Arduino boards.
MotoMama is a motor drivers shield for Arduino, based on L298N H-bridge driver chip....
MotoMama is a motor drivers shield for Arduino, based on L298N H-bridge driver chip. You can use this shield to drive two DC motors or an four-wire two-phase stepper motors with...
-
AvailableDC variklių valdymo priedėlis (L298P)
-
AvailableL298 Motor Shield (SHD-L298N)
Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount onto standard Arduino Duemilanoveand Arduino Mega.
Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum...
Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount onto standard Arduino Duemilanoveand...
-
Available4 motor driver shield (1.2A, I2C)
Instead of a L293D darlington driver, there are installed TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
Instead of a L293D darlington driver, there are installed TB6612 MOSFET driver: with...
Instead of a L293D darlington driver, there are installed TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across...
-
AvailableDual Step Motor Driver Shield
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine. It uses A3967SLB microstepping motor driver.
Dual stepper motor driver shield can drive 2 stepper motors at the same time by...
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be...
-
AvailableCNC priedėlis
-
Available16-Channel 12-bit PWM/Servo Shield
-
AvailableIS Shield
IS Shield is a relay shield for Arduino, with 2 channels mechanical relays and 2 channels MOS switch, providing an easy way for applications of voltage controlling from low to high.
IS Shield is a relay shield for Arduino, with 2 channels mechanical relays and 2...
IS Shield is a relay shield for Arduino, with 2 channels mechanical relays and 2 channels MOS switch, providing an easy way for applications of voltage controlling from low to...
-
Out of stockGPS shield
Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino as a GPS receiver with SD storage, it is easy to use for recording the position data into SD card by Arduino
Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino...
Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino as a GPS receiver with SD storage, it is easy to use for recording the position data into...
-
AvailableBluetooth shield
The Bluetooth Shield integrates a Serial Bluetooth module. It can be easily used with Arduino/Iteaduino for transparent wireless serial communication. You can choose two pins from Arduino D0 to D7 as Software Serial Ports to communicate with Bluetooth Shield (D0 and D1 is Hardware Serial Port).
The Bluetooth Shield integrates a Serial Bluetooth module. It can be easily used with...
The Bluetooth Shield integrates a Serial Bluetooth module. It can be easily used with Arduino/Iteaduino for transparent wireless serial communication. You can choose two pins...
-
Out of stockW5100 Ethernet Shield
W5100 Ethernet shield is a WIZnet W5100 breakout board with POE and Micro-SD card designed for Arduino platform. 5V/3.3V compatible operation voltage level makes it compatible with Arduino boards, leafmaple, and other Arduino compatible board.
W5100 Ethernet shield is a WIZnet W5100 breakout board with POE and Micro-SD card...
W5100 Ethernet shield is a WIZnet W5100 breakout board with POE and Micro-SD card designed for Arduino platform. 5V/3.3V compatible operation voltage level makes it compatible...
-
Out of stockCAN-BUS Shield
The CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. With an OBD-II converter cable added on and the OBD-II library imported, you are ready to build an onboard diagnostic device or data logger.
The CAN-BUS is a common industrial bus because of its long travel distance, medium...
The CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as...
-
Out of stockWiFi priedėlis (CC3000)
-
Out of stockArduino Wireless Programmer
Arduino Wireless Programmer is designed for uploading the program from your PC/laptop to Arduino board just by Bluetooth. Use with this programmer you can upload the code via wireless instead of using USB cable, it will be very useful for updating the code to the Arduino board which in the box or case.
Arduino Wireless Programmer is designed for uploading the program from your PC/laptop...
Arduino Wireless Programmer is designed for uploading the program from your PC/laptop to Arduino board just by Bluetooth. Use with this programmer you can upload the code via...
-
Out of stockRFID reader shield SHD-NFC
RFID/NFC Shield is a Near Field Communication interface for Arduino build around the popular NXP PN532 integrated circuit and SPI communication between Arduino and NFC Shield.. RFID/NFC is a short-distance radio technology that enables communication between devices that are held close together. Use as a RFID reader with Mifare One tags (ISO14443 Type-A) and cards (13.56Mhz).
RFID/NFC Shield is a Near Field Communication interface for Arduino build around the...
RFID/NFC Shield is a Near Field Communication interface for Arduino build around the popular NXP PN532 integrated circuit and SPI communication between Arduino and NFC Shield.....
-
AvailableStackable SD Card shield
Stackable SD card shield is a standard SD card / TF card break out board for Arduino. The SD card shield adds storage to your Arduino project. It supports SD, SDHC, or MicroSD TF cards. It just uses the SPI ports of Arduino,and you can plug more other shield on it.
Stackable SD card shield is a standard SD card / TF card break out board for Arduino....
Stackable SD card shield is a standard SD card / TF card break out board for Arduino. The SD card shield adds storage to your Arduino project. It supports SD, SDHC, or MicroSD...
-
AvailableIBridge lite
IBridge lite is a 3X3 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino, you can plug it on Arduino board directly, and get a small development platform with keypad input and Graphic LCD display.
IBridge lite is a 3X3 key-pad shield with a 5110 Graphic LCD interface. It is...
IBridge lite is a 3X3 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino, you can plug it on Arduino board directly, and get a small development...
-
AvailableDuomenų kaupimo priedėlis
-
AvailableJoystick shield
You can use the Joystick shield sits on top of your Arduino and turns it into a simple controller. 7 momentary push buttons and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.
You can use the Joystick shield sits on top of your Arduino and turns it into a simple...
You can use the Joystick shield sits on top of your Arduino and turns it into a simple controller. 7 momentary push buttons and a two-axis thumb joystick gives your Arduino...
-
AvailableTouch Shield
The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino projects with the touch shield. The touch shield has12 capacitive touch pads. With this shield you can have a total of 12 touch sensitive buttons. An on-board logic level converter allows it to work with 5V and 3.3V Arduino boards.
The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's...
The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino projects with the touch shield. The touch...
-
Out of stockPower shield
Power Shield is a portable offline power supply board for Arduino. Using two AAA batteries and with high-efficiency DC-DC boost circuit, this shield is the power source which can output 5V/350mA. Standard Arduino pin map makes it compatible with Iteaduino series and other Arduino compatible board.
Power Shield is a portable offline power supply board for Arduino. Using two AAA...
Power Shield is a portable offline power supply board for Arduino. Using two AAA batteries and with high-efficiency DC-DC boost circuit, this shield is the power source which...
-
AvailableRAMPS 1.4 Reprap MendelPrusa 3D Printer Control Board
The board is designed to be flexible in the user's power source availability, allowing for an ATX power supply to power the board, or the user can choose to install the voltage regulator kit for use with any power supply 7V-30V.The board features a developer friendly expansion port supporting I2C, SPI, UART, as well as a few ADC pins. All 14 expansion pins can be used as GPIO as well.
The board is designed to be flexible in the user's power source availability, allowing...
The board is designed to be flexible in the user's power source availability, allowing for an ATX power supply to power the board, or the user can choose to install the voltage...
-
Out of stockTwo DC motors driver shield (L298P)
The Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features.
The Motor Shield is based on the L298 , which is a dual full-bridge driver designed to...
The Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive...
-
AvailableESP8266 shield
-
AvailableBluetooth BLE (v4) priedėlis
-
