Top sellers
-
Out of stockTFT LCD ITDB02 Arduino Shield
The ITDB02 LCD module is work in 3.3V voltage level and it's not compatible with Arduino pins , so we make a shield for Arduino to connect with these LCDs. Now user can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
The ITDB02 LCD module is work in 3.3V voltage level and it's not compatible with...
The ITDB02 LCD module is work in 3.3V voltage level and it's not compatible with Arduino pins , so we make a shield for Arduino to connect with these LCDs. Now user can directly...
-
AvailableAlcohol Sensor MQ303A
MQ303A is a semiconductor sensor for Alcohol detection. It has very good sensitivity and fast response to alcohol, suitable for portable alcohol detector.
MQ303A is a semiconductor sensor for Alcohol detection. It has very good sensitivity...
MQ303A is a semiconductor sensor for Alcohol detection. It has very good sensitivity and fast response to alcohol, suitable for portable alcohol detector.
-
Out of stockArduino Wireless Programmer
Arduino Wireless Programmer is designed for uploading the program from your PC/laptop to Arduino board just by Bluetooth. Use with this programmer you can upload the code via wireless instead of using USB cable, it will be very useful for updating the code to the Arduino board which in the box or case.
Arduino Wireless Programmer is designed for uploading the program from your PC/laptop...
Arduino Wireless Programmer is designed for uploading the program from your PC/laptop to Arduino board just by Bluetooth. Use with this programmer you can upload the code via...
-
AvailableArduino MEGA tvirtinimo elementas
-
AvailableRFID transperant key Tag S50 (13.56MHz)
This is a MiFare Classic keychain fob - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
This is a MiFare Classic keychain fob - often used for electronic locks or customer...
This is a MiFare Classic keychain fob - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is...
-
AvailableRFID coin tag S50 (13.56MHz)
This is a MiFare Classic coin fob - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
This is a MiFare Classic coin fob - often used for electronic locks or customer...
This is a MiFare Classic coin fob - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired....
-
AvailableMFRC522 RFID Module
t is an contactless reader module based on the MFRC522 from NXP B.V.. Communication Via Serial makes it simple and easy-using. Compatible with ISO/IEC 14443 A/MIFARE cards, it supports all variants of the MIFARE Mini, MIFARE 1K, MIFARE 4K, MIFARE Ultralight, MIFARE DESFire EV1 and MIFARE Plus RF identification protocols, and the operating distance in Read/Write mode is up to 40 mm.
t is an contactless reader module based on the MFRC522 from NXP B.V.. Communication Via...
t is an contactless reader module based on the MFRC522 from NXP B.V.. Communication Via Serial makes it simple and easy-using. Compatible with ISO/IEC 14443 A/MIFARE cards, it...
-
Out of stockSvorio jutiklis (iki 1 kg)
-
AvailableVibration Sensor 801s (Octopus)
Octopus Passive buzzer Brick is based on a Vibration sensor, High Sensitivity Vibration Detection Sensor - Golden.
Octopus Passive buzzer Brick is based on a Vibration sensor, High Sensitivity Vibration...
Octopus Passive buzzer Brick is based on a Vibration sensor, High Sensitivity Vibration Detection Sensor - Golden.
-
Out of stockIteaduino DUE
The Iteaduino DUE is a microcontroller board based on the Atmel SAM3X8E ARM Crotex-M3 core. It is the improvement board based on the Arduino DUE. It has 54 digital IO pins, 12 analog inputs, 4 UARTs, a 84MHz clock, an USB OTG capable connection, 2 DACs, 2 IIC, a power jack, an SPI header, a reset button and an erase button.
The Iteaduino DUE is a microcontroller board based on the Atmel SAM3X8E ARM Crotex-M3...
The Iteaduino DUE is a microcontroller board based on the Atmel SAM3X8E ARM Crotex-M3 core. It is the improvement board based on the Arduino DUE. It has 54 digital IO pins, 12...
-
AvailableArduino Nano IO shield
Nano IO shield is a breakout board for Arduino Nano. It breaks out all pins as Electronic brick 3pin interface, the Zigbee XBee Series Modules and nRF24L01 wireless interface. And it supports 7-12V external power supply.
Nano IO shield is a breakout board for Arduino Nano. It breaks out all pins as...
Nano IO shield is a breakout board for Arduino Nano. It breaks out all pins as Electronic brick 3pin interface, the Zigbee XBee Series Modules and nRF24L01 wireless interface....
-
Out of stockNextion NX2432T043 (4.3')
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control...
Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or...
-
AvailableJoystick module
Analog joysticks module. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down. There are 5 pins on board: VCC, GND, X, Y and Button. Connect the module with 5V power suppy with VCC and GND, you can read out the joystick status by X,Y and button pins.
Analog joysticks module. Directional movements are simply two potentiometers - one for...
Analog joysticks module. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated...
-
Out of stockLoad Cell (Weight Sensor) - 5 kg.
Driver voltage: 5-10VForce variation output: voltage signalSize: 12.7 x 12.7 x 75mm
Driver voltage: 5-10VForce variation output: voltage signalSize: 12.7 x 12.7 x 75mm
Driver voltage: 5-10VForce variation output: voltage signalSize: 12.7 x 12.7 x 75mm
-
Out of stockRaspberry PI maitinimas su išjungimo mygtuku
-
Available3-Axis Digital Compass Sensor (Octopus)
3-Axis Digital Compass Sensor is a sensor module based on HMC5883L three-axis digital compass IC. HMC5883L is a surface mount high integration module and a digital interface with a weak magnetic sensor chips, used in low-cost areas of the compass and magnetic field detection.
3-Axis Digital Compass Sensor is a sensor module based on HMC5883L three-axis digital...
3-Axis Digital Compass Sensor is a sensor module based on HMC5883L three-axis digital compass IC. HMC5883L is a surface mount high integration module and a digital interface...
-
AvailableISP 10 perėjimas į 6 kontaktus
-
AvailableBLE Development Shield
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with Arduino Uno). Together with BLEduino, this BLE Shield forms an ideal prototyping platform for both software and hardware developers to go wireless. You will be able to develop your own smart bracelet, smart pedometer, etc. It's a low-power, real-time low energy communication perfect for embedded designs.
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with...
The BLE Development Shield for BLEduino is specially designed for BLEduino (BLE with Arduino Uno). Together with BLEduino, this BLE Shield forms an ideal prototyping platform...
-
Out of stockRatas - Omni Wheel
-
AvailableSpeaker 3070 (8ohm, 5W)
-
AvailableRaspberry PI kamera
-
AvailableADKeypad (Octopus)
This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project.
This keyboard uses an analog input to read the five key state which saves IO resource...
This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing...
-
AvailableWeMos D1 mini dual base shield
This is a double socket (dual base) that provides more space for more modules.This module was designed to work with the D1 Mini IoT Board.
This is a double socket (dual base) that provides more space for more modules.This...
This is a double socket (dual base) that provides more space for more modules.This module was designed to work with the D1 Mini IoT Board.
-
AvailableNextion IO Adapter
-
AvailableSonoff jungiklis (T1 EU 2 kanalų)
-
Out of stockPolycrystalline PET Solar Cell (6V, 330mA)
Polycrystalline PET Solar Cell, Working Voltage: 6 V, Max Working Current: 0.33 A, Max Power: 2 W, size: 110 x 136 x 3 mm/4.3 x 5.4 x 0.12 inch(L x W x H)
Polycrystalline PET Solar Cell, Working Voltage: 6 V, Max Working Current: 0.33 A, Max...
Polycrystalline PET Solar Cell, Working Voltage: 6 V, Max Working Current: 0.33 A, Max Power: 2 W, size: 110 x 136 x 3 mm/4.3 x 5.4 x 0.12 inch(L x W x H)
-
Out of stockRobot arm (FreaksArm)
It’s 4-axis robot arm and arduino-based. It is very suitable for children education and to help achieve the purpose of edutainment during familiarizing mechanical arm’s assembly structure and connection. This ARM is perfect for children and beginners to learn robot arm, it was conceived to make children understand robotics, electronics and program.
It’s 4-axis robot arm and arduino-based. It is very suitable for children education...
It’s 4-axis robot arm and arduino-based. It is very suitable for children education and to help achieve the purpose of edutainment during familiarizing mechanical arm’s...
-
AvailableMQ-9 Semiconductor Sensor (CO/Combustible Gas)
MQ-9 gas sensor has high sensitity to Carbon Monoxide, Methane and LPG. The sensor could be used to detect different gases contains CO and combustible gases, it is with low cost and suitable for different application. The sensitivity of the sensor can be adjusted by using the potentiometer. Sensor uses 5V.
MQ-9 gas sensor has high sensitity to Carbon Monoxide, Methane and LPG. The sensor...
MQ-9 gas sensor has high sensitity to Carbon Monoxide, Methane and LPG. The sensor could be used to detect different gases contains CO and combustible gases, it is with low cost...
-
-
Out of stockGarso įrašymo ir grojimo modulis ISD1820
-
Out of stockWEMOS D1 mini Lithium battery shield
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro from a single cell (3.7V) lithium battery. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos...
The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro from a single cell (3.7V) lithium battery. When the battery is depleted simply...
-
Out of stockVGA camera module OV7670
The OV7670 is a low cost image sensor + DSP that can operate at a maximum of 30 fps and 640 x 480 ("VGA") resolutions, equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This preprocessing can be configured via the Serial Camera Control Bus (SCCB).
The OV7670 is a low cost image sensor + DSP that can operate at a maximum of 30 fps and...
The OV7670 is a low cost image sensor + DSP that can operate at a maximum of 30 fps and 640 x 480 ("VGA") resolutions, equivalent to 0.3 Megapixels. The captured image can be...
-
Out of stockWeMos D1 mini triple base shield
This is a triple socket (triple base) that provides more space for more modules.This module was designed to work with the D1 Mini IoT Board.
This is a triple socket (triple base) that provides more space for more modules.This...
This is a triple socket (triple base) that provides more space for more modules.This module was designed to work with the D1 Mini IoT Board.
-
AvailableBluetooth SPP-C module (HC-06 compatible)
Bluetooth Class 2, Built-in PCB radio frequency antenna, Support UART interface, 3.3V power supply, Operating Frequency Band:2.4GHz -2.48GHz unlicensed ISM band , Bluetooth Specification: V2.1+EDR , Host Interface: UART
Bluetooth Class 2, Built-in PCB radio frequency antenna, Support UART interface,...
Bluetooth Class 2, Built-in PCB radio frequency antenna, Support UART interface, 3.3V power supply, Operating Frequency Band:2.4GHz -2.48GHz unlicensed ISM band ,...
-
Out of stockGSM/GPRS smart Switch (Sonoff G1)
Sonoff G1 is a GSM smart power switch that allows users to remotely turn on/off any connected appliances by Android and iOS app eWeLink via GPRS network. You will have to insert a SIM card (GSM/GPRS:800/900/1800/1900MHz) and use the 2G GPRS network to control connected appliances. Users can apply the wireless switch to modern agriculture like greenhouse light control,watering machine,oxygen pump.
Sonoff G1 is a GSM smart power switch that allows users to remotely turn on/off any...
Sonoff G1 is a GSM smart power switch that allows users to remotely turn on/off any connected appliances by Android and iOS app eWeLink via GPRS network. You will have to insert...
-
AvailableRGB 5050 LED module (KY-009)
The KY-009 RGB Full Color LED SMD Module consists of a 5050 SMD LED, use with limiting resistors to prevent burnout. Compatible with popular electronics platforms like Arduino, Raspberry Pi and ESP8266. Control of the module with the Arduino can be achieved cool lighting effects.
The KY-009 RGB Full Color LED SMD Module consists of a 5050 SMD LED, use with limiting...
The KY-009 RGB Full Color LED SMD Module consists of a 5050 SMD LED, use with limiting resistors to prevent burnout. Compatible with popular electronics platforms like Arduino,...
-
AvailablePrecision adjustable resistance (100K)
The Trimpot 3296 series are cermet, through hole trimming potentiometers. These potentiometers are multiturn which performs a variety of circuit adjustments in all types of electronic equipment. Typical applications are measuring linear distance, angle or rotation in production equipments.
The Trimpot 3296 series are cermet, through hole trimming potentiometers. These...
The Trimpot 3296 series are cermet, through hole trimming potentiometers. These potentiometers are multiturn which performs a variety of circuit adjustments in all types of...
-
AvailableUSB Alligator clips
Cable Length:60cm, one connector is alligator clips another connector:USB Male
Cable Length:60cm, one connector is alligator clips another connector:USB Male
Cable Length:60cm, one connector is alligator clips another connector:USB Male
-
AvailableSensor:bit for micro:bit
Sensor:bit is a breakout board based on micro:bit. It has extended all available IO ports on micro:bit, and lead out them in the form of GVS. With this board, we can extend various 3V electric brick modules like LED light, photocell, etc.. On the board, it has integrated a buzzer and an audio jack, which allows us to hear music from the buzzer or with our headphone.
Sensor:bit is a breakout board based on micro:bit. It has extended all available IO...
Sensor:bit is a breakout board based on micro:bit. It has extended all available IO ports on micro:bit, and lead out them in the form of GVS. With this board, we can extend...
-
-
-
AvailableIS Shield
IS Shield is a relay shield for Arduino, with 2 channels mechanical relays and 2 channels MOS switch, providing an easy way for applications of voltage controlling from low to high.
IS Shield is a relay shield for Arduino, with 2 channels mechanical relays and 2...
IS Shield is a relay shield for Arduino, with 2 channels mechanical relays and 2 channels MOS switch, providing an easy way for applications of voltage controlling from low to...
-
Out of stockCurrent Transducer LTS 6-NP
For the electronic measurement of currents: DC, AC, pulsed, mixed with galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit).
For the electronic measurement of currents: DC, AC, pulsed, mixed with galvanic...
For the electronic measurement of currents: DC, AC, pulsed, mixed with galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit).
-
Out of stock16x2 LCD display (red)
-
AvailableRaspberry Pi Arduino Shield Add-on
This RPI Arduino Shield Add-on has extended 32pin connector of RPI to Arduino pins, which will facilitate connections to all kinds of arduino shields. Meanwhile, two groups of electronic brick interfaces are equipped on the add-on, which are free to be connected to various electronic bricks.
This RPI Arduino Shield Add-on has extended 32pin connector of RPI to Arduino pins,...
This RPI Arduino Shield Add-on has extended 32pin connector of RPI to Arduino pins, which will facilitate connections to all kinds of arduino shields. Meanwhile, two groups of...
-
AvailableDual Step Motor Driver Shield
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine. It uses A3967SLB microstepping motor driver.
Dual stepper motor driver shield can drive 2 stepper motors at the same time by...
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be...
-
Out of stockRFID reader shield SHD-NFC
RFID/NFC Shield is a Near Field Communication interface for Arduino build around the popular NXP PN532 integrated circuit and SPI communication between Arduino and NFC Shield.. RFID/NFC is a short-distance radio technology that enables communication between devices that are held close together. Use as a RFID reader with Mifare One tags (ISO14443 Type-A) and cards (13.56Mhz).
RFID/NFC Shield is a Near Field Communication interface for Arduino build around the...
RFID/NFC Shield is a Near Field Communication interface for Arduino build around the popular NXP PN532 integrated circuit and SPI communication between Arduino and NFC Shield.....
-
Available2.8" TFT LCD Touch Shield
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ILI9325DS with 8bit data and 4bit control interface.
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT...
Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino shield...
-
AvailableWireless power supply module
The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insulation coil, it could serve as a replacement for the Wireless Power Supply with stable 5V output voltage and maximum 600mA output current. Its small size and insulation coil is more suitable for using in wireless project.
The Wireless Charging Module can be applied in electronic equipments in common use for...
The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insulation coil,...
-
Out of stockLilypad valdiklių programatorius(FTDI basic)