Top sellers
-
-
AvailableBreadboard jumper wires (140 pcs. with bax)
This is breadboard Assistant Kit is include 140pcs breadboard jumper wires. Which has varying lengths. There are 14 various lengths, and each of length include 10pcs. Length : 2 ,5,7,10,12,15,17,20,22,25,50,75,100,125 (mm).
This is breadboard Assistant Kit is include 140pcs breadboard jumper wires. Which has...
This is breadboard Assistant Kit is include 140pcs breadboard jumper wires. Which has varying lengths. There are 14 various lengths, and each of length include 10pcs. Length : 2...
-
Out of stockTower Pro MG90S 14G Mini Metal Gear Steering Servo
Tower Pro MG90S analog metal giear mini servo. Weight: 13.4g, Dimension: 22.8*12.2*28.5mm, Stall torque: 1.8kg/cm(4.8V )2.2kg/cm(6V), Operating speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v), Operating voltage: 4.8-6.0V, Dead band width: 5us, Modulation: Analog, Gear Type: Metal, Rotation/Support: Dual Bearings
Tower Pro MG90S analog metal giear mini servo. Weight: 13.4g, Dimension:...
Tower Pro MG90S analog metal giear mini servo. Weight: 13.4g, Dimension: 22.8*12.2*28.5mm, Stall torque: 1.8kg/cm(4.8V )2.2kg/cm(6V), Operating speed: 0.1sec/60degree(4.8v),...
-
Out of stockBluetooth module HM-10
The module is small and easy to use, with the preprogrammed firmware of manufacturer, you can quickly build BLE communications via its AT command. Supporting BLE communications with iphone, ipad, Android 4.3 and PC computer.
The module is small and easy to use, with the preprogrammed firmware of manufacturer,...
The module is small and easy to use, with the preprogrammed firmware of manufacturer, you can quickly build BLE communications via its AT command. Supporting BLE communications...
-
Out of stockAM2302 (DHT22) Humidity Temperature Sensor
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature.
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital...
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't require extra components so you can get right...
-
AvailableGoogle Cardboard (Electfreak version)
-
AvailableArduino Starter Kit (Beginner)
The Arduino Starter Kit provided by ElecFreaks is a great material to get users into learning step-by-step conveniently. For this kit, there is no need for soldering, plug then use, the construction of the working circuit can be done within one minute. It has 9 courses in total, content includes LED, infrared sensor, servo, and IR remote control.
The Arduino Starter Kit provided by ElecFreaks is a great material to get users into...
The Arduino Starter Kit provided by ElecFreaks is a great material to get users into learning step-by-step conveniently. For this kit, there is no need for soldering, plug then...
-
AvailableBluetooth Module HC-06
The Bluetooth wireless serial port module, Drop-in replacement for wired serial connections, transparent usage. You can use it. It is simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
The Bluetooth wireless serial port module, Drop-in replacement for wired serial...
The Bluetooth wireless serial port module, Drop-in replacement for wired serial connections, transparent usage. You can use it. It is simply for a serial port replacement to...
-
Out of stockElectronic Brick - Electricity Meter(Analog)
Electronic brick of electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals. The maximum current that can be detected can reach 5A, and the present current signal can be read via analog I / O port.
Electronic brick of electricity sensor is based on TA12-100 current transformer, which...
Electronic brick of electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals. The maximum...
-
AvailableMoisture Sensor (EB)
Electronic brick of soil moisture sensor is mainly used to detect the moisture content in the soil. The control board can get the moisture value or threshold in the soil via analog or digital pins.
Electronic brick of soil moisture sensor is mainly used to detect the moisture content...
Electronic brick of soil moisture sensor is mainly used to detect the moisture content in the soil. The control board can get the moisture value or threshold in the soil via...
-
AvailablePotenciometras su rankenėle (10K)
-
AvailableHumidity Temperature Sensor DHT11
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity, but its smaller and less expensive
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a...
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out...
-
AvailableElectronic Brick - Rotary Potentiometer Brick
Electronic brick of rotary potentiometer can be connected to analog I/O port, and the analog value will vary accordingly when rotated to different positions.
Electronic brick of rotary potentiometer can be connected to analog I/O port, and the...
Electronic brick of rotary potentiometer can be connected to analog I/O port, and the analog value will vary accordingly when rotated to different positions.
-
Out of stockDC variklis su priedais
-
AvailableArduino Sensor Shield
Arduino sensor shield is specifically designed for Arduino board to connect to various types of electronic brick modules. It is compatible with the mainstream two interfaces of electronic bricks in the market: 2.0mm 4-pin grove interface and 2.54mm 3-pin interface. In addition, the shield is equipped with XBee interface for users to connect it with various external wireless modules.
Arduino sensor shield is specifically designed for Arduino board to connect to various...
Arduino sensor shield is specifically designed for Arduino board to connect to various types of electronic brick modules. It is compatible with the mainstream two interfaces of...
-
AvailableDC gear (Reduction) motor P12 6V 70RPM
Gear (reduction ) running a speed at 200rpm.All you need to do is connect the postive and negative pole-pin,simple enough for beginners. Torque: 2.5KG CM
Gear (reduction ) running a speed at 200rpm.All you need to do is connect the postive...
Gear (reduction ) running a speed at 200rpm.All you need to do is connect the postive and negative pole-pin,simple enough for beginners. Torque: 2.5KG CM
-
-
AvailableSpeed module with indicator
This is a speed module for smart car, which adopted the Groove radio photoelectricity, as long as it can go through the nontransparent objects, the Groove (with the disk from the shop in use together)will be triggered to output 5V TTL.Pulses with Schmitt trigger debounce,very stable,can be used to measure the speed,to survey the distance,and perform other functions.
This is a speed module for smart car, which adopted the Groove radio photoelectricity,...
This is a speed module for smart car, which adopted the Groove radio photoelectricity, as long as it can go through the nontransparent objects, the Groove (with the disk from...
-
Available3D printing
-
AvailableElektroninių svarstyklių modulis HX711
-
AvailableElectronic Brick - MQ - 2 Gas Sensor Brick
The electronic brick of gas sensor can be used in fire protection systems to detect hydrogen, isobutane, liquefied petroleum gas, methane, carbon monoxide, alcohol, smoke, propane and other harmful gases.
The electronic brick of gas sensor can be used in fire protection systems to detect...
The electronic brick of gas sensor can be used in fire protection systems to detect hydrogen, isobutane, liquefied petroleum gas, methane, carbon monoxide, alcohol, smoke,...
-
Out of stock1 kanalo rėlės modulis
-
AvailableEthernet modulis ENC28J60
-
-
Out of stockRFID sticker 13.56 MHZ (Ntag216, 900 bytes)
Chip:Ntag216, physical capacity: 900 bytes Usable capacity: 888 bytes, Protocol: ISO14443A, Working frequency: 13.56 MHZ, Diameter: 25mm
Chip:Ntag216, physical capacity: 900 bytes Usable capacity: 888 bytes, Protocol:...
Chip:Ntag216, physical capacity: 900 bytes Usable capacity: 888 bytes, Protocol: ISO14443A, Working frequency: 13.56 MHZ, Diameter: 25mm
-
AvailableLCD shield with rotary encoder
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a rotary encoder. It is fully compatible with the Arduino UNO board.
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a...
LCD Key Shield is an LCD expansion board with a 1602 LCD display , a five-way key, a rotary encoder. It is fully compatible with the Arduino UNO board.
-
AvailableSafe Voltage WiFi Wireless Switch Smart (Sonoff SV)Safe Voltage...
Sonoff SV (Safe Voltage) is a Sonoff version with low power supply, which supports 5-24V power supply. Power supply separation enables it to control both AC and DC power. It has GIPO reserved to support secondary development.
Sonoff SV (Safe Voltage) is a Sonoff version with low power supply, which supports...
Sonoff SV (Safe Voltage) is a Sonoff version with low power supply, which supports 5-24V power supply. Power supply separation enables it to control both AC and DC power. It has...
-
Out of stockPlatinum temperature sensor PT100
-
Out of stockUSB cable (type A / B)
USB cable, type A / B, length: 1 m. Color: Black. It's needed to connect Arduino or Arduino Mega with your computer.
USB cable, type A / B, length: 1 m. Color: Black. It's needed to connect Arduino or...
USB cable, type A / B, length: 1 m. Color: Black. It's needed to connect Arduino or Arduino Mega with your computer.
-
Out of stockBreadboard Power Supply Module
This is a power module for the standard bread board. It's concave design so will not waste your proto zone. This breadboard power shield support Mini USB power supply and power jack 7-12V supply. There are two independent power that 5V/3.3V optional. With this board, you can send power to both power lane of the breadboard, and each side has an on/off switch.
This is a power module for the standard bread board. It's concave design so will not...
This is a power module for the standard bread board. It's concave design so will not waste your proto zone. This breadboard power shield support Mini USB power supply and power...
-
-
Out of stockBluetooth Module HC-05
The Bluetooth wireless serial port module, Drop-in replacement for wired serial connections, transparent usage. You can use it. It is simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
The Bluetooth wireless serial port module, Drop-in replacement for wired serial...
The Bluetooth wireless serial port module, Drop-in replacement for wired serial connections, transparent usage. You can use it. It is simply for a serial port replacement to...
-
Out of stockSonoff Dual WiFi wireless relay (Sonoff dual)
Sonoff Dual is a 2 gang WiFi light switch that can remote control 2 appliances/lights separately. The switch supports timers and scenes to auto-turn on/off devices.
Sonoff Dual is a 2 gang WiFi light switch that can remote control 2 appliances/lights...
Sonoff Dual is a 2 gang WiFi light switch that can remote control 2 appliances/lights separately. The switch supports timers and scenes to auto-turn on/off devices.
-
AvailablePrecision adjustable resistance (10K)
The Trimpot 3296 series are cermet, through hole trimming potentiometers. These potentiometers are multiturn which performs a variety of circuit adjustments in all types of electronic equipment. Typical applications are measuring linear distance, angle or rotation in production equipments.
The Trimpot 3296 series are cermet, through hole trimming potentiometers. These...
The Trimpot 3296 series are cermet, through hole trimming potentiometers. These potentiometers are multiturn which performs a variety of circuit adjustments in all types of...
-
Available2.4GHz transmitter nRF24L01p+ PA+ LNA+ V3.1
The newest module nRF24L01P version 2.0(upate to V3.1 now) is nRF24L01+PA+LNA upgrad it has same size and more stable performance.The transmission distance to reach 1000 meter with 2DB Antenna at 250kbps data rate on open area.
The newest module nRF24L01P version 2.0(upate to V3.1 now) is nRF24L01+PA+LNA upgrad it...
The newest module nRF24L01P version 2.0(upate to V3.1 now) is nRF24L01+PA+LNA upgrad it has same size and more stable performance.The transmission distance to reach 1000 meter...
-
Out of stockArduino starter kit ( with microcontroller )
This Arduino training kit prepared according well-known and freely distributed book "A Complete Beginners Guide to the Arduino (M. McRoberts). This book will guide you, step by step, through using the Starter Kit to learn about the Arduino hardware, software and general electronics theory.
This Arduino training kit prepared according well-known and freely distributed book "A...
This Arduino training kit prepared according well-known and freely distributed book "A Complete Beginners Guide to the Arduino (M. McRoberts). This book will guide you, step by...
-
Available16 MHz kvarcinis rezonatorius
-
Out of stockPower supply 5V 2.1A, microUSB
Power supply for Raspberry Pi, pcDuino and other controllers. Max output 2.1 A. Cabel length 1 m.
Power supply for Raspberry Pi, pcDuino and other controllers. Max output 2.1 A. Cabel...
Power supply for Raspberry Pi, pcDuino and other controllers. Max output 2.1 A. Cabel length 1 m.
-
Available5V žingsninis variklis 28BYJ48
-
Available433Mhz RF link kit
The 433MHz RF link kit is consisted of transmitter and receiver, popularly used for remote control.
The 433MHz RF link kit is consisted of transmitter and receiver, popularly used for...
The 433MHz RF link kit is consisted of transmitter and receiver, popularly used for remote control.
-
AvailableProto Screw Shield
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a reset button, LED for D13 pin indicating.
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It...
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large...
-
AvailableDS3231 RTC module for Raspberry Pi
To keep the devices time accurate we need to add a module that holds the time whenever the RPi has no power running to it and then updates the RPi with the time saved on the battery powered module when the full power is restored and the system starts running again.
To keep the devices time accurate we need to add a module that holds the time whenever...
To keep the devices time accurate we need to add a module that holds the time whenever the RPi has no power running to it and then updates the RPi with the time saved on the...
-
AvailableSmart Car Chassis 2WD V15
Main features: Materials imported acrylic, high-precision laser cutting, With double rotary encoder disk, can be used to speed,Compact car, floor-sided film, scratch protection. Holes for Arduino and other components.
Main features: Materials imported acrylic, high-precision laser cutting, With double...
Main features: Materials imported acrylic, high-precision laser cutting, With double rotary encoder disk, can be used to speed,Compact car, floor-sided film, scratch protection....
-
AvailableSkaitmeninis servo mechanizmas MG996R
-
AvailableMicro SD card module
Micro SD card reader module, through the file system and the SPI interface driver, MCU to complete the file system to read and write MicroSD card. Users can directly use IDE comes with an SD card to complete the library card initialization and read-write.
Micro SD card reader module, through the file system and the SPI interface driver, MCU...
Micro SD card reader module, through the file system and the SPI interface driver, MCU to complete the file system to read and write MicroSD card. Users can directly use IDE...
-
Available4 kanalų 5V rėlių modulis
-
AvailableKontaktų juosta (40 kont. kampinė)
-
AvailableCollision Module
A collision forefront switch module output low ; not collide , the output high .
A collision forefront switch module output low ; not collide , the output high .
A collision forefront switch module output low ; not collide , the output high .
-
Out of stockQuick connector cable terminal block
Voltage:250V, Current:10A, Wire: 4mm², Centre hole: 3mm, Size:19.77mm x 17.91mm x 13.70mm (L*W*H)
Voltage:250V, Current:10A, Wire: 4mm², Centre hole: 3mm, Size:19.77mm x 17.91mm x...
Voltage:250V, Current:10A, Wire: 4mm², Centre hole: 3mm, Size:19.77mm x 17.91mm x 13.70mm (L*W*H)
-
Out of stockWiFi Smart Switch with temperature and humidity monitoring 16A...
Sonoff TH16 is a wireless temperature and humidity monitoring switch which can remote monitor and set temperature and humidity range to turn on/off connected appliances through the iOS/Android APP eWeLink.
Sonoff TH16 is a wireless temperature and humidity monitoring switch which can remote...
Sonoff TH16 is a wireless temperature and humidity monitoring switch which can remote monitor and set temperature and humidity range to turn on/off connected appliances through...